Industrial Chimney Manufacturers and Suppliers in Ahmedabad

Industrial Chimney Suppliers in Ahmedabad

In Vatva, Naroda and Odhav GIDC, a typical chemical or dyestuff unit runs a coal- or briquette-fired boiler beside a thermic-fluid heater, each with its own stack. With sulphur-bearing coal, the top few metres of a steel chimney are the weak point: as the flue gas cools below its acid dew point, condensate attacks the shell from inside, so plate thickness and corrosion allowance matter more there than at the base. Pharma plants on the Changodar–Bavla belt add incinerator and solvent-recovery vents, while Sanand's engineering plants mostly need slender stacks for DG sets, paint ovens and heat-treatment furnaces, where exit temperature matters more than acid.

Ahmedabad's summer heats the sunny side of a shell well above the shaded side, and gusty pre-monsoon winds follow, so both go into the design: wind load per IS 875 Part 3 for the site's basic wind speed and terrain, then checks under IS 6533 Part 2 for shell stress and wind-induced oscillation. Since the city is roughly 660 km from Bhosari, a stack is normally sent as a few fully welded sections joined by bolted flanges, which turns erection into a crane job rather than days of site welding. Units replacing an old chimney usually aim to finish erection before the June rains.

Sterling Engineers & Boilers, established in 1995, builds stacks of 300 to 3700 mm bore and heights up to 60 m at its MIDC Bhosari works, either free-standing or held by guy ropes. For each chimney we prepare the design calculation and general-arrangement drawing for your approval, and the plate test certificates and weld inspection records go with the job. To get a quotation, send the boiler or heater rating and fuel, the stack height written in your GPCB consent, the flue-gas temperature and the foundation drawing, or call +91-968-901-1211.

Specifications

• Minimum Order Quantity :01 Nos
• Material :M.S. IS: 2062- 2006
• Usage/Application :For Disposal of Combustion Products, Fumes etc.of Furnaces as well as Heating and Fume Extraction
• Chimney Height :As per Client Requirement
• Mount Type :Self Supported
• Filters :Baffle Filter
• Color :Aluminium Heat Resistant Paint
• Thickness :variable thickness as per application
• Size :As per Design
• Thread Size :As per Design

Industrial Chimneys for Ahmedabad’s Industries

Ahmedabad’s chemical and dyestuff units are concentrated in Vatva, Naroda and Odhav GIDC, pharma manufacturing runs along the Changodar–Bavla belt, and Sanand has grown into an automobile and engineering hub. Textile processing, the city’s oldest industry, still runs a large number of process boilers.

Most industrial chimneys enquiries from Ahmedabad come from chemical and dyestuff plants, pharmaceutical and bulk-drug units, textile processing houses and auto-component and engineering plants, mainly in Vatva, Naroda and Odhav GIDC, the Changodar–Bavla belt and Sanand. What each of them typically needs:

• Chemical and dyestuff plants: Boiler and thermic-fluid heater exhausts and process vents need chimneys of the height set in the unit’s consent to operate.
• Pharmaceutical and bulk-drug units: Boilers, thermic-fluid heaters and incinerators need stacks with sampling ports positioned for stack monitoring.
• Textile processing houses: Coal- and biomass-fired boilers in processing clusters need self-supporting MS chimneys connected to dust collectors.
• Auto-component and engineering plants: Paint-shop ovens, heat-treatment furnaces and DG sets each need their own stack.

Site conditions and delivery to Ahmedabad

High summer temperatures and strong pre-monsoon winds are factored into the chimney’s thermal and wind-load design. Ahmedabad is about 660 km by road from our works at MIDC Bhosari, Pune, about a day’s transit, so most assemblies are shipped fully fabricated and tested.