Boiler Pressure Parts Manufacturers and Suppliers in Jamnagar

Boiler Pressure Parts Suppliers in Jamnagar

Jamnagar has two very different kinds of steam user. The refining complex at Motikhavdi and the second refinery at Vadinar run high-pressure utility boilers and waste-heat units for power and process duty, where superheater and economiser coils must match the original alloy grade, tube size and bend geometry so that steam temperature and gas-side pressure drop stay where the design expects them. At the other end of the scale, brass-part makers in the Dared and Shankar Tekri estates use small boilers for cleaning, pickling and bath heating, which call for an occasional coil or header rather than a major overhaul.

The Saurashtra coast brings salt-laden air, high humidity and driving monsoon rain, a combination that attacks exposed headers, supports and the outside of tube banks, as well as anything stored in the open while it waits for a shutdown. Jamnagar is about 960 km by road from Bhosari, so large coil banks are designed as transport-sized modules, with the site joints, their weld procedure and their inspection agreed before fabrication starts. Refinery turnarounds are planned long in advance, and fitting pressure-part procurement into that plan, including lead time to source alloy tube, is what keeps the schedule safe.

Sterling, founded in 1995, fabricates at its MIDC Bhosari works: superheaters, reheaters, economisers, water walls, headers, finned-tube modules and HP and LP heaters. Certificates traceable to heat numbers, weld and heat-treatment records, hydraulic test reports and IBR documents for Gujarat go with each delivery, and your third-party inspector is welcome at the agreed hold points. Please send the design code and specification, drawing references, tube grade and dimensions, quantities and the turnaround window, and call +91-968-901-1211 to set up a technical discussion.

Manufacture, Supply & Erection of Boiler Pressure Parts such as water walls, economizers, superheaters, reheaters, steam / mud drums, blow down tanks, condensers, HP / LP heaters, headers, finned tube boiler modules, critical piping, Steam Piping etc.

Boiler Pressure Parts for Jamnagar’s Industries

Jamnagar is home to the world’s largest refining complex at Motikhavdi, with a second refinery nearby at Vadinar. The city itself is India’s main centre for brass parts, with hundreds of units in the Dared and Shankar Tekri industrial estates.

Most boiler pressure parts enquiries from Jamnagar come from refineries and petrochemical units, steel and metal-processing plants, power and co-generation plants and chemical and dyestuff plants, mainly in Dared and Shankar Tekri GIDC and the refinery zone at Motikhavdi. What each of them typically needs:

• Refineries and petrochemical units: High-pressure utility boilers and waste-heat recovery units need superheater and economiser coils that match the original metallurgy exactly.
• Steel and metal-processing plants: Waste-heat recovery boilers on furnaces and kilns wear quickly, so coils and headers are replaced on a fixed cycle.
• Power and co-generation plants: Overhauls call for large quantities of water-wall panels and superheater and reheater coils, built to the OEM drawing.
• Chemical and dyestuff plants: Process-steam boilers run long campaigns, so economiser coils, superheater coils and headers are replaced to the original drawing during planned shutdowns.

Site conditions and delivery to Jamnagar

Salt air speeds up external corrosion, so surface preparation and painting of headers, supports and exposed tubes deserve extra attention. Jamnagar is about 960 km by road from our works at MIDC Bhosari, Pune, a transit of two to three days, so large items are planned as transportable sections with the final joints made at site where needed.