Industrial Chimney Manufacturers and Suppliers in Jamnagar

Industrial Chimney Suppliers in Jamnagar

Jamnagar's brass-parts industry in Dared and Shankar Tekri runs a large number of small melting furnaces, and their fume-extraction stacks carry hot, metal-laden fumes that are usually filtered before release; these chimneys are small in diameter but see high temperatures near the furnace end. The refinery zone at Motikhavdi and the refinery at Vadinar work at another scale, with stacks for process heaters, captive power and utility boilers that must pass wind and seismic checks and meet the owner's engineering standards. Chemical units and the smaller power and utility installations around the city fall between those two extremes.

On the Gulf of Kutch, Jamnagar sites face salt-laden wind for much of the year, and a steel chimney there can lose metal on the outside as quickly as on the inside. We therefore suggest a larger corrosion allowance, blast cleaning before painting and a coating suited to marine exposure and the shell's working temperature. The distance of about 960 km from Bhosari means stacks travel in transportable lengths; where a tall stack would need more flanged joints than is sensible, the final joints can be welded at site. Strong monsoon winds mean erection is kept to the drier months.

Our works at MIDC Bhosari, Pune, set up in 1995, engineer each stack under IS 6533 Part 2 (1989), with wind pressure worked out per IS 875 Part 3, and build them from 300 mm up to 3700 mm diameter in self-supported or guy-rope supported form. For furnace duty, refractory or ceramic-wool lining with a stainless inner cladding is available. Before quoting we need the furnace or boiler duty and fuel, gas temperature and flow rate, the GPCB consent height and the foundation or anchor-bolt drawing. Send them, or ring +91-968-901-1211, and Sterling will set out the design basis with its offer.

Specifications

• Minimum Order Quantity :01 Nos
• Material :M.S. IS: 2062- 2006
• Usage/Application :For Disposal of Combustion Products, Fumes etc.of Furnaces as well as Heating and Fume Extraction
• Chimney Height :As per Client Requirement
• Mount Type :Self Supported
• Filters :Baffle Filter
• Color :Aluminium Heat Resistant Paint
• Thickness :variable thickness as per application
• Size :As per Design
• Thread Size :As per Design

Industrial Chimneys for Jamnagar’s Industries

Jamnagar is home to the world’s largest refining complex at Motikhavdi, with a second refinery nearby at Vadinar. The city itself is India’s main centre for brass parts, with hundreds of units in the Dared and Shankar Tekri industrial estates.

Most industrial chimneys enquiries from Jamnagar come from refineries and petrochemical units, steel and metal-processing plants, power and co-generation plants and chemical and dyestuff plants, mainly in Dared and Shankar Tekri GIDC and the refinery zone at Motikhavdi. What each of them typically needs:

• Refineries and petrochemical units: Tall stacks have to be checked for wind and seismic loads and lined for hot flue gas.
• Steel and metal-processing plants: Furnaces and kilns need high-temperature stacks, often with refractory or insulation lining.
• Power and co-generation plants: Large-diameter stacks connect to ESPs or bag filters on captive and co-generation boilers.
• Chemical and dyestuff plants: Boiler and thermic-fluid heater exhausts and process vents need chimneys of the height set in the unit’s consent to operate.

Site conditions and delivery to Jamnagar

In salt-laden air a chimney needs a higher corrosion allowance, a suitable paint system and regular shell inspection. Jamnagar is about 960 km by road from our works at MIDC Bhosari, Pune, a transit of two to three days, so large items are planned as transportable sections with the final joints made at site where needed.