Industrial Chimney Manufacturers and Suppliers in Korba

Industrial Chimney Suppliers in Korba

Korba's industry is dominated by coal-fired power stations and BALCO's aluminium smelter with its captive plant, and the main chimneys at those stations are large reinforced-concrete structures, outside the range of a steel stack fabricator. Steel stacks matter in the auxiliaries and the smaller plants: auxiliary boilers, DG sets, metal-processing furnaces and kilns, and ancillary units whose stacks connect to ESPs or bag filters. These carry high-ash flue gas from local coal, so erosion where the breeching enters the stack and corrosion in the cooler top section are the usual points of failure, and a lining or wear plate at the entry is often justified.

Shipping to Korba from Pune, around 1,200 km by road, needs careful planning: shell lengths are kept within normal trailer limits, the largest diameters are assessed for route clearances, and where necessary the stack is sent in more pieces with the final joints made at site. Chhattisgarh's summers are very hot and the monsoon is heavy, so both shell temperature and wind loads enter the design. Erection is usually planned for the post-monsoon months or aligned with annual unit overhauls, when auxiliary equipment can be taken out of service.

Sterling Engineers & Boilers (established 1995, MIDC Bhosari) designs steel stacks to IS 6533 Part 2 and IS 875 Part 3 and fabricates them self-supported or guyed from 300 mm to 3700 mm diameter, lined with refractory or ceramic wool and stainless cladding where gas temperatures require. For an enquiry from Korba, please include the equipment the stack serves, flue-gas temperature and flow, the CECB consent height and sampling-port requirement, the filter arrangement upstream and site access details. We will then confirm scope and design basis in the quotation; call +91-968-901-1211 with any questions.

Specifications

• Minimum Order Quantity :01 Nos
• Material :M.S. IS: 2062- 2006
• Usage/Application :For Disposal of Combustion Products, Fumes etc.of Furnaces as well as Heating and Fume Extraction
• Chimney Height :As per Client Requirement
• Mount Type :Self Supported
• Filters :Baffle Filter
• Color :Aluminium Heat Resistant Paint
• Thickness :variable thickness as per application
• Size :As per Design
• Thread Size :As per Design

Industrial Chimneys for Korba’s Industries

Korba is often called the power capital of central India: NTPC and Chhattisgarh state power stations sit on the SECL coalfields, alongside BALCO’s aluminium smelter and its captive power plant. Most industrial demand here is for power-plant and heavy-industry maintenance.

Most industrial chimneys enquiries from Korba come from power and co-generation plants and steel and metal-processing plants, mainly in the NTPC, CSPGCL and BALCO plant areas and the SECL coalfields. What each of them typically needs:

• Power and co-generation plants: Large-diameter stacks connect to ESPs or bag filters on captive and co-generation boilers.
• Steel and metal-processing plants: Furnaces and kilns need high-temperature stacks, often with refractory or insulation lining.

Site conditions and delivery to Korba

High summer temperatures and strong pre-monsoon winds are factored into the chimney’s thermal and wind-load design. Korba is about 1,200 km by road from our works at MIDC Bhosari, Pune, a transit of two to three days, so large items are planned as transportable sections with the final joints made at site where needed.